PRODUCTS

Current Position:Home / Products

Oblique Wedge Lensed Fibers
Product Features Product Applications
The traditional wedge fiber lens needs to be coated with antireflective coating on the end surface to minimize the light reflectivity, while the oblique wedge lensed fiber, due to its special geometry, makes the refractive angle between the cylindrical lens and the laser chip without affecting the optical path transmission, which effectively avoids the impact of reflected light on the life of the laser chip, and also eliminates the signal noise caused by reflected light. Compared with the traditional process, it reduces the cost problem caused by the low yield of coating and the long-term reliability problem caused by the coating process. Assembly for LD
Optical direct coupling from LD chip into fiber
Optical direct coupling from fiber into waveguide
Specifications
Parameter Unit Values
Fiber Type / Conventional single-mode / multimode / polarization maintaining fiber, special optical fibers provided by customers
Wedge Angle ° 50°~120°
Bevel Angle   8°±1°
Radius of Curvature μm 6~9±1 μm or the radius specified by customers
Strip Length mm >5±1mm
Axis Deviation ° ≤1.5°
Ordering Information
O W L F
        Fiber Type
1=G652 or
equivalent
5=980-20 or
equivalent
6=HI060 or
equivalent
S=Specify
Wedge Angle
50=50°
51=51°
......
98=98°
99=99°
S0=Specify
Radius
6=6μm
7=7μm
8=8μm
9=9μm
S=Specify
Strip Length
1=5mm
2=10mm
3=15mm
4=20mm
S=Specify
Bevel Angle
8=8°
S=Specify
Pigtail Type
1=250um
bare fiber
2=900um
loose tube
S=Specify
Pigtail Length
0=0.5m
1=0.75m
2=1.0m
3=1.5m
4=2.0m
S=Specify
Connector
0=None
1=FC/PC
2=FC/SPC
3=FC/APC
7=FC/UPC